ATG Common Commands
Library of frequently used commands for most automatic tank gauges including name and description.
Written by Jess Hamilton
Updated at July 27th, 2024
Expand the sections below to view common commands for the VR TLS-350, VR TLS-450, FF TS-1000 in VR mode, FF TS-550 or EVO in VR mode, or the Incon 1000 Native.
VR TLS-350
| Command Name | Terminal Command | Description |
|---|---|---|
| Basic Inventory | 200 | Current Inventory of the tanks |
| Current Alarms | I10100 | Current alarms as shown on the front panel |
| Sys Config Report | I10200 | Displays boards installed in the console. |
| Priority Alarm History | I11100 | List of active and cleared priority alarms. |
| Non-priority Alarm History | I11200 | List of active and cleared non-priority alarms. |
| Active Alarms | I11300 | List of active alarms, both priority and non |
| Cleared Alarm Report | I11400 | List of cleared alarms |
| Inventory Report | I20100 | Current Inventory of the tanks |
| In-Tank Leak Detect Report | I20300 | Most recent in-tank leak test results |
| In-Tank Shift Inventory Report | I20400 | Current shift inventory |
| Tank Release Detection History | I20700 | History of in-tank leak tests, with annual and periodic test results |
| In-Tank Leak Test Results Report | I20800 | Most recent tank test results |
| CSLD Results | I25100 | Results of CSLD tests |
| Liquid Sensors Results | I30100 | Current status of configured liquid sensors |
| Sensor Alarm Hist. Report | I30200 | Sensor alarm history, last three alarms for each configured liquid sensor |
| Smart Sensor Status Report | I31500 | Current status of configured smart sensors |
| Smart Sensor Status Alarm History | I31600 | Sensor alarm history, last three alarms for each configured smart sensor |
| Smart Sensor Install Report | I33300 | Shows when smart sensor installed, and the type |
| PLLD Results | I37300 | Passing results for PLLD tests |
| PLLD History | I37400 | History of PLLD tests |
| WPLLD Line Leak Test Results | I38800 | Passing results for Wireless PLLD tests |
| WPLLD Line Leak Test History | I38900 | History of Wireless PLLD tests |
| Tank Config | I60100 | Check if tanks are configured and turned on or off |
| Tank Product Label | I60200 | Product labels for each tank |
| Tank Full Volume | I60400 | Capacity of tank |
| Tank Leak Test Method | I61100 | Check if using tank leak tests, and if static or CSLD |
| Tank (Siphon) Manifolded Partners | I61200 | Check for manifolds programmed in gauge |
| Liquid Sensor Setup | I70100 | Check if Sensors are configured and turned on or off |
| Liquid Sensor Type | I70200 | Type of liquid sensor (Tri-state, Normally Closed, etc.) |
| Liquid Sensor Location Label | I70300 | Label of each liquid sensor |
| Smart Sensor Configuration | I72100 | Check if Sensors are configured and turned on or off |
| Smart Sensor Location Label | I72200 | Label of each smart sensor |
| Pressure Line Leak Setup | I78000 | Indicates which tank is tied to which PLLD. |
| Software Version | I90200 | Software version of the gauge |
VR TLS-450
| Command Name | Terminal Command | Description |
|---|---|---|
| Basic Inventory | 200 | Current Inventory of the tanks |
| Current Alarms | I10100 | Current alarms as shown on the front panel |
| Priority Alarm History | I11100 | List of active and cleared priority alarms. |
| Non-priority Alarm History | I11200 | List of active and cleared non-priority alarms. |
| Active Alarms | I11300 | List of active alarms, both priority and non |
| Cleared Alarm Report | I11400 | List of cleared alarms |
| Inventory Report | I20100 | Current Inventory of the tanks |
| In-Tank Leak Detect Report | I20300 | Most recent in-tank leak test results |
| In-Tank Shift Inventory Report | I20400 | Current shift inventory |
| Tank Release Detection History | I20700 | History of in-tank leak tests, with annual and periodic test results |
| In-Tank Leak Test Results Report | I20800 | Most recent tank test results |
| CSLD Results | I25100 | Results of CSLD tests |
| Liquid Sensors Results | I30100 | Current status of configured liquid sensors |
| Sensor Alarm Hist. Report | I30200 | Sensor alarm history, last three alarms for each configured liquid sensor |
| Smart Sensor Status Report | I31B00 | Current status of configured smart sensors |
| Smart Sensor Status Alarm History | I31C00 | Sensor alarm history, last three alarms for each configured smart sensor |
| PLLD Results | I37300 | Passing results for PLLD tests |
| PLLD History | I37400 | History of PLLD tests |
| Tank Config | I60100 | Check if tanks are configured and turned on or off |
| Tank Product Label | I60200 | Product labels for each tank |
| Tank Full Volume | I60400 | Capacity of tank |
| Tank Leak Test Method | I61100 | Check if using tank leak tests, and if static or CSLD |
| Tank (Siphon) Manifolded Partners | I61200 | Check for manifolds programmed in gauge |
| Liquid Sensor Setup | I70100 | Check if Sensors are configured and turned on or off |
| Liquid Sensor Type | I70200 | Type of liquid sensor (Tri-state, Normally Closed, etc.) |
| Liquid Sensor Location Label | I70300 | Label of each liquid sensor |
| Smart Sensor Configuration | I72F00 | Check if Sensors are configured and turned on or off |
| Smart Sensor Location Label | I72E00 | Label of each smart sensor |
| Pressure Line Leak Setup | I78000 | Indicates which tank is tied to which PLLD. |
| Software Version | I90700 | Software version of the gauge |
FF TS-1000 in VR mode
*NOTE: This setup is limited on data available. Most known commands return computer format responses.
| Command Name | Terminal Command | Description |
|---|---|---|
| Basic Inventory | 200 | Current Inventory of the tanks |
| In-Tank Leak Detect Report | 210 | Most recent in-tank leak test results |
| Probe alarm history | 240 | Alarm history for the probes |
| System Info | 930 | System information |
FF TS-550 or EVO in VR mode
*NOTE: Not all of these commands work on all software versions.
| Command Name | Terminal Command | Description |
|---|---|---|
| Active Alarms | I11300 | List of active alarms, both priority and non |
| Liquid Sensors Results | I30100 | Current status of configured liquid sensors |
| Tank Release Detection History | I20700 | History of in-tank leak tests, with annual and periodic test results |
| Sensor Alarm Hist. Report | I30200 | Sensor alarm history, last three alarms for each configured liquid sensor |
| PLLD History | I37400 | History of PLLD tests |
| Tank Leak Test Method | I61100 | Check if using tank leak tests, and if static or CSLD |
| Software Version | I90200 | Software version of the gauge |
Incon 1000 Native
*NOTE: This mode only has computer format responses, so it's best only to use to verify that the gauge is in Native mode. A Ctrl-C is needed after the string (^A1I003CCC^C)
| Command Name | Terminal Command | Description |
|---|---|---|
| Active Alarms | 1l003CCC | Provides the active alarms. |
For additional commands, please refer to the user manual or technical documentation provided by the hardware's manufacturer.